Products - Sensors
Our products are used for measurement of viscosity and temperature in a process environment. A complete system consists of up to four pieces, 1) the measurement sensor, 2) electronics to power and excite the sensor then interpret and linearize the response, 3) software resident on your computer for download of datalogs, alarm setup, graphing, tabular history, etc., and 4) accessories for interface to process lines, tanks, lab sampling, temperature control, etc. A sensor with electronics will run automatically as soon as power is applied, so the minimum system is a sensor and a circuit card. The client side software adds functionality and convenience. Accessories enable easy interface to virtually any process line configuration and convenience in the lab for sampling and measurement.Sensors
;)
The sensor probe head is 0.9 inch (23mm) diameter with a 3 or 5.5 inch (75 or 140mm) stem. The long stem ensures good thermal isolation of the measurement head. Measurements can be made from 2 to 1000 centipoise.
Viscosity measurement accuracy is +/- two percent of full scale, however, typical accuracies are +/- one percent of full scale. The sensor can be oriented in any direction.
The measurement cantilever beam is on the face of the device inside a protective, shielding cage. The face of the device is thick and the beam is immersed in the fluid, so there are virtually no pressure effects.
 |
VSH223 Process Viscosity & Temperature Sensor
3-inch 316ss stem, precision [±0.1degC] Pt RTD, Rare earth magnetic measurement. Integral high temp 10 ft [3m] cable with 3-pin locking connector. 4 measurement ranges from 2-1000cp Requires "200" series electronics [C200, B2ac, B2dc] Mates to XC2-xxx extension cable. data sheet |
|
|
VSH323 Process Viscosity & Temperature Sensor
3-inch 316ss stem, precision [±0.1degC] Pt RTD, No magnet. Integral high temp 16" [40cm] cable with 6-pin locking connector. 4 measurement ranges from 5-1000cp Requires "300" series electronics [C300, B3ac, B3dc] Requires XC3-xxx extension cable with built in pre-amp. data sheet |
Installation