Products - Sensors
Our products are used for measurement
of viscosity and temperature in either a laboratory
or process environment. A complete system consists
of up to four pieces, 1) the measurement sensor, 2)
electronics to power and excite the sensor then interpret
and linearize the response, 3) software resident on
your computer for download of datalogs, alarm setup,
graphing, tabular history, etc., and 4) accessories
for interface to process lines, tanks, lab sampling,
temperature control, etc. A sensor with electronics
will run automatically as soon as power is applied,
so the minimum system is a sensor and a circuit card.
The client side software adds functionality and convenience.
Accessories enable easy interface to virtually any
process line configuration and convenience in the
lab for sampling and measurement.
Sensors
Our viscometers are used for process
measurement. The probe head is 0.9 inch (23mm) diameter
with a 3 inch (75mm) stem. The long stem
ensures good
thermal isolation of the measurement head.
Measurements can be made from 2 to 2000 centipoise.
Viscosity measurement accuracy is +/- two percent of
full scale, however, typical accuracies are +/- one
percent of full scale. The sensor can be oriented in
any direction.
The measurement cantilever beam is on the face of the
device inside a protective, shielding cage. The face
of the device is thick and the beam is immersed in the
fluid, so there are virtually no pressure effects. |
|
;)
